Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] Lighthouse 3.4 Saving Settings and Configuration data?
05-30-19, 08:30 AM (This post was last modified: 05-30-19 10:46 AM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] Lighthouse 3.4 Saving Settings and Configuration data?
I am finding that I need several factory resets as I get all of my systems up and working together properly. I am readily able to backup user data such as waypoints, tracks, etc., but after every factory re-set I have to completely repopulate all of my settings, rebuild my apps page, and reconfigure all of my screens. Is there a way to backup the settings/configuration data? I can't find it in the LH 3.4 manual but thought I saw vague reference to it elsewhere on the forum.

Thanks

Dave
Find all posts by this user
Quote this message in a reply
05-30-19, 10:49 AM
Post: #2
RE: [CA11] Lighthouse 3.4 Saving Settings and Configuration data?
Welcome back to the Raymarine Forum Dave,

According to the Software History table for LightHouse 3 software, the Backup and Restore feature was not implemented until LightHouse 3 v3.7.70.
Visit this user's website Find all posts by this user
Quote this message in a reply
06-03-19, 07:36 AM (This post was last modified: 06-03-19 07:43 AM by Chuck - Raymarine - Moderator.)
Post: #3
RE: [CA11] Lighthouse 3.4 Saving Settings and Configuration data?
Thanks Chuck. I completed my upgrade to 3.946 and I now see the button to save my settings.

Dave
Find all posts by this user
Quote this message in a reply
06-05-19, 04:41 AM (This post was last modified: 06-05-19 07:49 AM by Chuck - Raymarine - Moderator.)
Post: #4
RE: [CA11] Lighthouse 3.4 Saving Settings and Configuration data?
Where is that button?
Find all posts by this user
Quote this message in a reply
06-05-19, 07:53 AM
Post: #5
RE: [CA11] Lighthouse 3.4 Saving Settings and Configuration data?
Carl,

The Save Settings feature may be accessed via the command sequence HOME->MY DATA->IMPORT/EXPORT->SAVE SETTINGS. This feature is further detailed within the Save MFD settings section of Chapter 5.8: My data of the LightHouse 3.9 Advanced Operation Instructions.
Visit this user's website Find all posts by this user
Quote this message in a reply
06-07-19, 04:51 AM (This post was last modified: 06-07-19 08:12 AM by Chuck - Raymarine - Moderator.)
Post: #6
RE: [CA11] Lighthouse 3.4 Saving Settings and Configuration data?
Thanks much.
Find all posts by this user
Quote this message in a reply
06-07-19, 08:12 AM
Post: #7
RE: [CA11] Lighthouse 3.4 Saving Settings and Configuration data?
You're welcome.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)