Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[DG] [DG11] Quantum2 Side mount on the mast
06-05-19, 08:08 AM (This post was last modified: 06-05-19 10:17 AM by Derek - Raymarine - Moderator.)
Post: #1
[DG11] Quantum2 Side mount on the mast
I have a quantum 2 but a mast configuration that does not allow me to mount it for and aft. Am I able to mount it on the side of the mast?
Find all posts by this user
Quote this message in a reply
06-05-19, 10:21 AM
Post: #2
RE: [DG11] Quantum2 Side mount on the mast
Hi Miles,

Thank you for your enquiry.

The Quantum two can be fitted to the side of a mast, using an AXIOM display, you will need to adjust the BEARING ALIGNMENT so that the targets on the radar correctly appear oriented, you will of course have a blind sector on the side where the mast is located, you can mask this affected sector to eliminate echo returns from the mast too. These two features are both in the current software version 3.9 of AXIOM.


Regards

Derek
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)