Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] gS MFD Compatibilty with Mercruiser Axius Autopilot
06-03-19, 07:29 AM (This post was last modified: 06-04-19 12:02 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] gS MFD Compatibilty with Mercruiser Axius Autopilot
Is the gS MFD compatible Mercruiser Axius Autopilot? I see notation that it supports Raymarine Evolution autopilot. Also, if it is compatible, are there any known issues either Lighthouse 2 or 3.

Thank you as always for your support.

John
Find all posts by this user
Quote this message in a reply
06-04-19, 12:11 PM
Post: #2
RE: [CA11] gS MFD Compatibilty with Mercruiser Axius Autopilot
Welcome to the Raymarine Forum John,

I'm not aware of any issues with passing navigational data associated with navigating to a waypoint/cursor position or following a route from a system running LightHouse II software or LightHouse 3 software to a Mercury Axius system. Some Axius systems feature a NMEA 0183 communications interface. Similarly, the following Raymarine MFDs feature a NMEA 0183 communications interface:
- Axiom XL MFDs
- Axiom Pro MFDs
- gS-Series MFDs
- eS-Series MFDs
- e-Series MFDs
- c-Series MFDs
- a9x/a12x MFDs.

Additionally, an Actisense NGW-1-ISO NMEA 0183 to NMEA 2000 data bridge may be use in conjunction with Raymarine MFDs lacking a NMEA 0183 communications interface:
- Axiom MFDs
- a6x/a7x MFDs.

Mercury Marine also offers a SmartCraft to NMEA 2000 gateway. If this gateway supports communications of navigational data associated with navigating to a waypoint/cursor position or following a route to the Mercury Axius system (recommend verifying with Mercury Marine), then it may be possible to utilize any of the above listed MFDs within the system.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)