Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG] [TG11] Raypilot with Garmin MFD
06-03-19, 12:54 PM (This post was last modified: 06-05-19 11:48 AM by Chuck - Raymarine - Moderator.)
Post: #1
[TG11] Raypilot with Garmin MFD
Updated the old Raymarine radar and char plotter to Garmin 7612xsv. What do I need to do to use the seatalk 100 and 650 head with the new mfd? Thanks in advance.
Find all posts by this user
Quote this message in a reply
06-04-19, 08:29 PM (This post was last modified: 06-05-19 11:49 AM by Chuck - Raymarine - Moderator.)
Post: #2
RE: [TG11] Raypilot with Garmin MFD
Hello rlfletc,

You'll need a Seatalk1 - SeatalkNG (AKA NMEA2000) convertor (http://www.raymarine.com.au/view/?id=3011. That will bridge heading from the pilot's Seatalk1 network to NMEA2000 and navigation data from the Garmin back the other way. You'll also need an STNG-Devicenet adaptor cable.

Regards,
Tom

Raymarine since 1999.
Interests: Diagnosis of problems in sonar/fishfinders, NMEA2000, ethernet comms, autopilots, thermal cameras
Location: Sydney, Australia.

Please don't PM me asking for direct support, please ask a public question instead so that others can see the question and answer. Forum posts will always be answered before PM requests.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)