Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Airmar tm275l/hw on axiom rvx
04-08-19, 03:58 PM (This post was last modified: 04-09-19 01:38 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] Airmar tm275l/hw on axiom rvx
Will the Axiom Pro rvx ping low and high of the airmar 275 transducer at the same time?
Find all posts by this user
Quote this message in a reply
04-09-19, 01:42 PM
Post: #2
RE: [CA11] Airmar tm275l/hw on axiom rvx
Welcome to the Raymarine Forum FISHFEARME,

Should Raymarine's A80318 TM275 LH-W transducer be interfaced to the Axiom Pro RVX MFD, then the Fishfinder application may be configured to plot low frequency CHIRP, high frequency CHIRP, or both simultaneously.
Find all posts by this user
Quote this message in a reply
05-23-19, 06:56 PM
Post: #3
RE: [CA11] Airmar tm275l/hw on axiom rvx
Are any adapter cables needed?
Find all posts by this user
Quote this message in a reply
05-24-19, 08:49 AM
Post: #4
RE: [CA11] Airmar tm275l/hw on axiom rvx
FISHFEARME,

The plug of Raymarine's A80318 TM275 LH-W transducer may be plugged directly into the 1kW Transducer socket of any of the following:
- Axiom Pro RVX MFD
- RVX1000
- CP470
- CP570
Find all posts by this user
Quote this message in a reply
06-07-19, 06:20 PM (This post was last modified: 06-10-19 09:56 AM by Chuck - Raymarine - Moderator.)
Post: #5
RE: [CA11] Airmar tm275l/hw on axiom rvx
A80327 will this cable fit the 1k port on the axiom rvx? And also plug into the a80318?
Find all posts by this user
Quote this message in a reply
06-11-19, 08:49 AM
Post: #6
RE: [CA11] Airmar tm275l/hw on axiom rvx
Yes, the A80327 Transducer Ext. Cable, CP470/570, 10M may be used to extend the A80318 TM275 LH-W transducer's cable. The extension cable features male and female plugs to permit the transducer's cable to be connected to one end of the extension able and the other end to be connected to the MFD's 1kW Transducer socket.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)