Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] EV-1 Sensor & ECU Mounting Location
06-11-19, 10:11 AM (This post was last modified: 06-11-19 10:16 AM by Chuck - Raymarine - Moderator.)
Post: #2
RE: [CA11] EV-1 Sensor & ECU Mounting Location
Welcome to the Raymarine Forum kingspade,

Q1. What technically would be the best location to mount if I am unable to mount in the engine room?
A1. All vessels differ with regard to layout and equipment. Accordingly, specific locations for the installation location for these components are not specified. Instead, the characteristics of the installation locations are specified. With respect engine rooms, installing an ACU or an EV-1/EV-2 in that location would contradict Raymarine's installation recommendations for these autopilot components. With respect to the EV-1/EV-2, spaces outside of the engine space where the EV-1/2 may meet the criteria shown below will suffice:

[Image: attachment.php?aid=3158]

With respect to the ACU, spaces outside of the engine space where the ACU may meet the criteria shown below will suffice:

[Image: attachment.php?aid=3157]


Attached File(s) Thumbnail(s)
       
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] EV-1 Sensor & ECU Mounting Location - Chuck - Raymarine - Moderator - 06-11-19 10:11 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)