Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] EV-1 Sensor & ECU Mounting Location
06-07-19, 10:04 AM (This post was last modified: 06-07-19 02:53 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] EV-1 Sensor & ECU Mounting Location
I have been searching the forums and the internet for information regarding the mounting locations of the EV-1 & ECU for my autopilot. I understand the interference issues etc, my only question is regarding the potential ignition source.

The manual states do not install in engine room or near fuel tanks.

I have lots of boats/installs online that utilize mounting on the forward firewall of the engine room which is technically still the engine room however the fuel vapors are still there.

What technically would be the best location to mount if I am unable to mount in the engine room?

I appreciate your help.

I have attached a pic of my firewall


Attached File(s) Thumbnail(s)
       

Next Gen Charters
1998 Baha Cruisers 285 Weekender Hardtop
Twin Merc 350 Inboards
Raymarine a78 Wi-Fi MFD - Evolution EV-150
CHIRP DownVision,RD418D Digital Radar Dome, ClearPulse, CPT-100, SeatalkNG
(2)Lowrance NMEA 2K Fuel flow sensors, Depth Raider probe,
(3) Cannon Mag-5 Downriggers
Find all posts by this user
Quote this message in a reply
06-11-19, 10:11 AM (This post was last modified: 06-11-19 10:16 AM by Chuck - Raymarine - Moderator.)
Post: #2
RE: [CA11] EV-1 Sensor & ECU Mounting Location
Welcome to the Raymarine Forum kingspade,

Q1. What technically would be the best location to mount if I am unable to mount in the engine room?
A1. All vessels differ with regard to layout and equipment. Accordingly, specific locations for the installation location for these components are not specified. Instead, the characteristics of the installation locations are specified. With respect engine rooms, installing an ACU or an EV-1/EV-2 in that location would contradict Raymarine's installation recommendations for these autopilot components. With respect to the EV-1/EV-2, spaces outside of the engine space where the EV-1/2 may meet the criteria shown below will suffice:

[Image: attachment.php?aid=3158]

With respect to the ACU, spaces outside of the engine space where the ACU may meet the criteria shown below will suffice:

[Image: attachment.php?aid=3157]


Attached File(s) Thumbnail(s)
       
Find all posts by this user
Quote this message in a reply
06-11-19, 11:07 AM
Post: #3
RE: [CA11] EV-1 Sensor & ECU Mounting Location
OK, thanks for clarification on the engine room location. I figured that was the case but I hoping for an exception to the warning that wasn't noted in the manual!

Thanks for your help

Next Gen Charters
1998 Baha Cruisers 285 Weekender Hardtop
Twin Merc 350 Inboards
Raymarine a78 Wi-Fi MFD - Evolution EV-150
CHIRP DownVision,RD418D Digital Radar Dome, ClearPulse, CPT-100, SeatalkNG
(2)Lowrance NMEA 2K Fuel flow sensors, Depth Raider probe,
(3) Cannon Mag-5 Downriggers
Find all posts by this user
Quote this message in a reply
06-11-19, 01:37 PM
Post: #4
RE: [CA11] EV-1 Sensor & ECU Mounting Location
You're welcome.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)