Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] MICRO TALK COMPATIBILITY
06-18-19, 12:49 PM (This post was last modified: 06-21-19 12:05 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] MICRO TALK COMPATIBILITY
Hi,
Could Micro Talk E 70361 interface at the same time instruments on Micronet MN01 1 and MN0 2?

Alex
Find all posts by this user
Quote this message in a reply
06-21-19, 12:09 PM
Post: #2
RE: [CA11] MICRO TALK COMPATIBILITY
Welcome the Raymarine Forum Alex,

In short, the answer is yes. Additionally, I believe that you may have meant to reference the MN100 and MN100-2.
Find all posts by this user
Quote this message in a reply
06-28-19, 07:26 AM (This post was last modified: 07-01-19 12:47 PM by Chuck - Raymarine - Moderator.)
Post: #3
RE: [CA11] MICRO TALK COMPATIBILITY
The T111 Dual Digital Display (MicroNet 01) is labelled MN30,
the Hull is MN100.
Is Micro Talk working both with MN30 and MN100?
Regards
Find all posts by this user
Quote this message in a reply
07-01-19, 12:47 PM
Post: #4
RE: [CA11] MICRO TALK COMPATIBILITY
Yes.
Find all posts by this user
Quote this message in a reply
07-03-19, 02:34 AM (This post was last modified: 07-03-19 08:04 AM by Chuck - Raymarine - Moderator.)
Post: #5
RE: [CA11] MICRO TALK COMPATIBILITY
In addition, could the new series AXIOM display MN30 and MN100 data?
Find all posts by this user
Quote this message in a reply
07-03-19, 10:12 AM (This post was last modified: 07-03-19 10:12 AM by Chuck - Raymarine - Moderator.)
Post: #6
RE: [CA11] MICRO TALK COMPATIBILITY
Alex,

Yes. The MicroTalk will indeed bridge data from the TackTick system (ex. wind, depth/speed/temp, GPS, etc.) to a system's powered and properly terminated SeaTalkng / NMEA 2000 backbone. Should a compatible MFD (a/c/e/eS/gS-Series MFD, Axiom/Axiom Pro/Axiom XL MFD, etc.) also be interfaced to the backbone, then data from the TackTick system may be displayed on the MFD.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)