Raymarine forum / Raymarine Forums / Autopilots v / [CA] [CA11] Clutch for Rotary drive

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Clutch for Rotary drive
06-21-19, 12:28 PM (This post was last modified: 06-21-19 12:41 PM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Clutch for Rotary drive
Welcome to the Raymarine Forum Dustin,

You may determine the voltage supported by the autopilot system by measuring the voltage supplied to the autopilot's course computer ... it will be 12VDC or 24VDC. Is there a part number stamped onto a plate or printed on a label which is in turn affixed to the rotary drive unit which might aid us in positively identifying whether the rotary drive is a Type 1 or Type 2 rotary drive? That said, the part number for the clutch is N007 irrespective of which model Raymarine / Raytheon rotary drive is owned.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Clutch for Rotary drive - Chuck - Raymarine - Moderator - 06-21-19 12:28 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication