Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[LW] [LW11] Radar overlay stopped working
07-11-19, 11:11 AM
Post: #3
RE: [LW11] Radar overlay stopped working
(07-11-19 08:22 AM)Louise - Raymarine - Moderator Wrote:  Dear E.hatch2086@cox.net,

Thank you for your post.

Can you confirm the radar is transmitting?

Are you on an Axiom running Lighthouse 3.9.46?

Go into the chart application>menu>settings>layers - underneath layers you will have a toggle switch for radar overlay, this needs to be toggled on and will be green in colour for on.

Many Thanks
Louise

Yes on radar screen I see images

I have latest software installed for Axiom and the new Q2 dome. On the Axiom this software was installed about 2 weeks ago after I reinstalled the latest software on the first Q2 dome. On the new Q2 dome after it was installed earlier this week I checked for updates and it said I had the latest so I did not reinstall them from my SD card

I have a heading and cog showing when I am moving about 8 it’s

The layers screen shows radar, AIS targets and range rings toggled on. On the chart I see Ais boats and the range rings but no radar image. If use app with split screen see chart on left and radar on right with images

Do I maybe need to reinstall the Q2 software for radar and the wired radar adapter when it is connected to the Axiom
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [LW11] Radar overlay stopped working - E.hatch2086@cox.net - 07-11-19 11:11 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)