Post Reply 
 
Thread Rating:
  • 1 Vote(s) - 4 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG11] ST 1000+ displays
12-03-19, 08:13 PM
Post: #11
RE: [TG11] ST 1000+ displays
What is the actual problem now? If still 'No Pilot' as from a few posts ago then that implies a problem with your wired Seatalk network between the S100's base station and the ST1000+. There are limited diagnostics you can do with this with just 2 Seatalk devices and no specialist test tools, but a multimeter should show a fluctuating voltage somewhere between perhaps 3 and 8V (0-12V data pulses, being averaged by a slow-reading meter.)

Raymarine since 1999.
Interests: Diagnosis of problems in sonar/fishfinders, NMEA2000, ethernet comms, autopilots, thermal cameras
Location: Sydney, Australia.

Please don't PM me asking for direct support, please ask a public question instead so that others can see the question and answer. Forum posts will always be answered before PM requests.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[TG11] ST 1000+ displays - bluetango - 07-30-19, 07:50 PM
RE: [TG11] ST 1000+ displays - Tom - Raymarine - Moderator - 12-03-19 08:13 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)