Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Networking Axiom Pro RVX and C90W
08-01-19, 07:14 PM (This post was last modified: 08-05-19 01:23 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] Networking Axiom Pro RVX and C90W
New to Raymarine. I have a "new to me" 2008 46' cruising boat with pilot house and flybridge helm stations that both have C90W MFD's with a single 600W transducer via DSM30 sounder (no radar, AP). I want to add an Axiom Pro 12 RVX to both helm stations and add Radar, AP, and AIS while keeping the C90W's as secondary displays. Can these be networked to share information? Thanks.
Find all posts by this user
Quote this message in a reply
08-05-19, 01:31 PM
Post: #2
RE: [CA11] Networking Axiom Pro RVX and C90W
Welcome to the Raymarine Forum Pawseidon,

Please click here to view a FAQ addressing this subject. If seeking to replace both MFDs with Axiom Pro MFDs (an Axiom Pro S MFD would be recommended for the second MFD), then the FAQ found here would apply. Should you need assistance in selecting a RV transducer, an autopilot, or radar transducer for the Axiom Pro MFD(s), then please respond accordingly.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)