Raymarine forum / Raymarine Forums / NAVAIDS v / [TG] [TG11] No GPS Info on MFD GPS Status Page

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG] [TG11] No GPS Info on MFD GPS Status Page
01-21-20, 09:49 PM
Post: #31
Tom - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 1,067
Joined: Nov 2017
Reputation: 7
RE: [TG11] No GPS Info on MFD GPS Status Page
Hello magic8,

Re. power supply: a multimeter won't tell you truly what's happening, to really verify the supply it needs to be tested with an oscilloscope at a time when the GPS is indicating a problem - just something to bear in mind if there are further issues. I've seen supplies that looked ok on my multimeter that were anything from 9V to >100V extremes on an oscilloscope.

Have you turned Differential off, as described in the FAQ and mentioned previously? This is known to cause intermittent loss of fix in Australia.

Tom
Raymarine since 1999.
Interests: Diagnosis of problems in sonar/fishfinders, NMEA2000, ethernet comms, autopilots, thermal cameras
Location: Sydney, Australia.

Please don't PM me asking for direct support, please ask a public question instead so that others can see the question and answer. Forum posts will always be answered before PM requests.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [TG11] No GPS Info on MFD GPS Status Page - Tom - Raymarine - Moderator - 01-21-20 09:49 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication