Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[LW] [LW11] Axiom Pro rvx to Airmar B164 20 degree 1KW
08-12-19, 06:31 AM (This post was last modified: 08-14-19 06:00 AM by Louise - Raymarine - Moderator.)
Post: #1
[LW11] Axiom Pro rvx to Airmar B164 20 degree 1KW
Hello,

I have recently upgraded my MFD to the Axiom Pro 12 rvx along with the 4kw HD Radome, RV 100 Realvision transom mount transducer, and the 1kw Airmar B164-20 d/t thruhull transducer. All are working except the Airmar 1 kw transducer. I am using a Raymarine A80496 adapter cable to connect the Airmar transducer to the 1 KW socket on the back of the Axiom. The axiom will not read or sense the 1 kw Airmar transducer. What am I doing wrong?

Regards - Eric
Find all posts by this user
Quote this message in a reply
08-23-19, 05:48 AM
Post: #2
RE: [LW11] Axiom Pro rvx to Airmar B164 20 degree 1KW
Dear eric peterson,

Thank you for your post.

Can you confirm the software revision you have installed in the Axiom Pro RVX. HOMESCREEN > SETTINGS - under the Axiom Pro description you will find your revision of software.

The 1kw Airmar B164-20 describes a family of transducers, can you confirm the Raymarine part number or what the transducer was previously connected to?

Many Thanks
Louise
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)