Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] E90\W not receiving all data from E140\W
08-17-19, 12:32 PM (This post was last modified: 08-22-19 02:44 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] E90\W not receiving all data from E140\W
I have a E140\W master chart plotter at my chart table and an E90\W on the helm pod. The E90\W is receiving all the chart data except no depth data is being displayed.
Is there a configuration setting I am missing? Rebooting doesn't help.
Find all posts by this user
Quote this message in a reply
08-22-19, 03:03 PM (This post was last modified: 08-22-19 03:04 PM by Chuck - Raymarine - Moderator.)
Post: #2
RE: [CA11] E90\W not receiving all data from E140\W
Welcome to the Raymarine Forum zed1776,

What is the source of depth data within your system? Can this data be viewed on the E140W? Which MFD has the chart card inserted within its reader? Which version of E-Series Widescreen MFD is installed within the E140W? Which version of E-Series Widescreen MFD is installed within the E90W?
Find all posts by this user
Quote this message in a reply
08-27-19, 03:20 PM (This post was last modified: 08-27-19 03:53 PM by Chuck - Raymarine - Moderator.)
Post: #3
RE: [CA11] E90\W not receiving all data from E140\W
Navionic charts recently updated. 00.01.15_r1443
Yes.
E140W, app v1.04, bootcode v1.09, baseboard v3.10
E90W, app v1.04, bootcode v1.09, baseboard v3.10
Find all posts by this user
Quote this message in a reply
08-27-19, 03:56 PM (This post was last modified: 08-27-19 03:56 PM by Chuck - Raymarine - Moderator.)
Post: #4
RE: [CA11] E90\W not receiving all data from E140\W
zed1776,

Please note that software within your E-Series Widescreen MFD has never been updated and should be updated accordingly with the latest available Raymarine product software update (v2.65) as the first step in resolving this issue. Upon completing the update, the Chart application's EasyView feature should be configured OFF.
Find all posts by this user
Quote this message in a reply
09-01-19, 08:18 PM
Post: #5
RE: [CA11] E90\W not receiving all data from E140\W
The instructions say to use a compact flash no larger than 128MB and the update is 357MB.
I will try a 2G compact flash but, my plotter did in fact work properly without this update.
Find all posts by this user
Quote this message in a reply
09-09-19, 08:35 AM
Post: #6
RE: [CA11] E90\W not receiving all data from E140\W
zed1776,

Yes. Unlike the bootloader of the A/C/E-Series Classic MFDs, the bootloader of the C/E-Series Widescreen MFDs should support use of CF memory cards having capacities up to 32GB.
Find all posts by this user
Quote this message in a reply
09-10-19, 07:20 PM (This post was last modified: 09-11-19 07:05 AM by Chuck - Raymarine - Moderator.)
Post: #7
RE: [CA11] E90\W not receiving all data from E140\W
I got the update on a card and went through the update process. Transfer is at 100%, Program is at 37% and Overall is at 97%. It has been stuck at this point for 3 hours now.
Find all posts by this user
Quote this message in a reply
09-11-19, 07:07 AM (This post was last modified: 09-11-19 07:46 AM by Chuck - Raymarine - Moderator.)
Post: #8
RE: [CA11] E90\W not receiving all data from E140\W
This is indeed atypical. Please note that the software within all MFDs within a system must be at the same level. Accordingly, should the software within one of the MFDs be updated, then the software within the other MFDs must be updated with the same version. Please see the PM sent to you.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)