Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Can't show SOG on Chart Screen of a78
08-19-19, 11:21 AM (This post was last modified: 08-23-19 07:43 AM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] Can't show SOG on Chart Screen of a78
I can't seem to figure out how to show SOG on the chart screen of my a78 MFD. I bought the printed manual and still can't do it. Any help?
Find all posts by this user
Quote this message in a reply
08-23-19, 07:45 AM (This post was last modified: 08-23-19 07:47 AM by Chuck - Raymarine - Moderator.)
Post: #2
RE: [CA11] Can't show SOG on Chart Screen of a78
Welcome back to the Raymarine Forum landingzone,

Please click here to view a FAQ addressing this subject. Detailed information on this subject may be found within the Customizing Databoxes section of Chapter 5.6 Databar and databox overview of the LightHouse II Release 19 Operating Instructions.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)