Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
cursor does not move with vessel symbol
06-03-16, 11:26 AM (This post was last modified: 06-06-16 09:43 AM by Chuck - Raymarine - Moderator.)
Post: #5
RE: cursor does not move with vessel symbol
followed this recommendation but had to change page set to do it. I was using a custom page set. had to change to chart/radar/sonar set to make change. now chart and radar are set in RM. However I established two split screens, chart/sonar and chart/radar. in both cases chart is in auto range and cursor will not follow ship. these charts it will not allow me to move from AR to RM. radar screen is in RM
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: cursor does not move with vessel symbol - captc36 - 06-03-16 11:26 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)