Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[JH] [JH11] Es127 not connecting to cp 470
09-13-19, 06:30 AM (This post was last modified: 09-13-19 07:35 AM by Chuck - Raymarine - Moderator.)
Post: #5
RE: [JH11] Es127 not connecting to cp 470
The answer to that would be no, Nor did the brand new battery. I went to see a certified repair/installer yesterday and Pete was very helpful though we didn't find the specific problem. He let me borrow a transducer to see if I get the same message. He stated there is likely an issue with the CP470 (which was working prior to now) Though that doesn't answer the question as to why the ES127 quit seeing the M260 I had installed prior to all these other issues. I got the message Transducer selection not available then, and that was without the CP470. The M260 was connected directly to the ES127 with the conversion cable and worked for some time. Then I got the transducer msg.. I was told it was likely a bad transducer, hence the new M265 which was connected to the CP470 and still nothing. I find it hard to believe that the M260 and CP470 both quit functioning simultaneously.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [JH11] Es127 not connecting to cp 470 - RKW68 - 09-13-19 06:30 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)