Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Transducer for axiom pro
09-13-19, 08:41 AM (This post was last modified: 09-13-19 08:41 AM by Chuck - Raymarine - Moderator.)
Post: #2
RE: [CA11] Transducer for axiom pro
Welcome back to the Raymarine Forum Mark,

Two versions of the DST800 are available from Raymarine. One version features an analog communications interface and will be connected to the depth, speed, and temperature transducer terminals of an i50 Tridata or iTC-5. The second version features a SeaTalkng/NMEA 2000. Should the analog DST800 transducer be interfaced to an iTC-5 or should the SMART SeaTalkng/NMEA 2000 version of the DST800 transducer be installed, then an i70S/i70 MFID will be required to calibrate / set offsets and to configure alarms associated with depth and temperature. These transducer will not support the MFD's fishfinder features.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Transducer for axiom pro - Chuck - Raymarine - Moderator - 09-13-19 08:41 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)