Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] Axiom Pro transdcer compatibility
09-20-19, 11:00 AM (This post was last modified: 09-23-19 03:36 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] Axiom Pro transdcer compatibility
Upgraded my C120 MFD to an Axiom Pro 12 RVX and would like to add STW (speed thru water) from a P66 transducer (E66054). I have a SeaTalk 5 way connector port available and both Raynet ports available on the Axiom MFD. The P66 transducer was formerly interfaced to the C120 thru a DSM300.
Find all posts by this user
Quote this message in a reply
09-23-19, 03:41 PM
Post: #2
RE: [CA11] Axiom Pro transdcer compatibility
Welcome to the Raymarine Forum ftenkel,

Should your model of P66 transducer have been directly mated to the Transducer socket of the DSM300, then it may be adapted (part # A80496) to be mated to the 1kW transducer socket of the Axiom Pro RVX MFD. Doing so will not only add speed through water data to the system, but will also add 50kHz and 200kHz fishfinder sonar channels to the system.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)