The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Marine Cameras v / [CA] [CA11] Flir Camera and Lighthouse 3 software

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Flir Camera and Lighthouse 3 software
09-28-19, 05:09 PM (This post was last modified: 10-01-19 03:24 PM by Chuck - Raymarine - Moderator.)
Post: #1
firstin Offline
Junior Member
**
 		Posts: 5
Joined: Mar 2017
Reputation: 0
[CA11] Flir Camera and Lighthouse 3 software
I have been struggling to get my Flir N237BE PoE camera to connect to my Axiom system consisting of Axiom 16 RVX Pro, Axiom 12 and Axiom 7. My master display, the Axiom 16, would not recognize the camera nor would the axiom 7. I have finally been able to have the camera recognized by the Axiom 12. I can view the camera on the Axiom 12 but the other two units just show a back screen. The only difference is the software. Axiom 12 is 3.9x and the other two are the most current 3.10x.

Is my issue that the new software does not recognize the camera? if so how can i revert the other two units to 3.9x software? All the new features of the 3.10 software are not relevant to me anyways.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] Flir Camera and Lighthouse 3 software - firstin - 09-28-19 05:09 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication