The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Marine Cameras v / CAM200iP not found

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
CAM200iP not found
05-31-16, 08:23 AM
Post: #1
safeandsoundinc Offline
Junior Member
**
 		Posts: 14
Joined: Feb 2016
Reputation: 0
CAM200iP not found
I have a CAM200iP connected to a GS165. Some days the MFD sees the camera, some days it does not. I have swapped the crossover coupler at the camera, I've tried all three ethernet ports. I've tried a separate ethernet cable with raynet adapters, all to no avail. When it did work I had the latest software on both units. The GS165 also does not turn the camera on and off, it's always powered, even when I remove power from the 12v wires, it's getting power through ethernet. Thanks for any help.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
CAM200iP not found - safeandsoundinc - 05-31-16 08:23 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication