Raymarine forum / Raymarine Forums / Marine Cameras v / [CA] [CA11] T353 no video, no movement

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] T353 no video, no movement
10-11-19, 11:37 AM (This post was last modified: 10-14-19 10:37 AM by Chuck - Raymarine - Moderator.)
Post: #1
zelatore Offline
Junior Member
**
 		Posts: 9
Joined: Apr 2016
Reputation: 0
[CA11] T353 no video, no movement
I have a T353 thermal camera connected to an E127 MFD; recently the video has only displayed a red screen with no image other than the FLIR logo and I cannot move the camera from it's home position. I also do not seem to have any settings controls through the on screen menus.

Any pointers before I start tearing into things?
Find all posts by this user
Quote this message in a reply
10-14-19, 10:39 AM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] T353 no video, no movement
Welcome to the Raymarine Forum zelatore,

Given to the reported symptoms, it appears that the camera's server is not starting. It is accordingly recommended that the camera be sent to Raymarine’s Product Repair Center to be bench checked / serviced.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication