Raymarine forum / Raymarine Forums / AIS v / [CA] [CA11] AIS on an Element 7

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] AIS on an Element 7
11-04-19, 04:22 PM (This post was last modified: 11-07-19 11:21 AM by Chuck - Raymarine - Moderator.)
Post: #5
atkinson.cj@btinternet.com Offline
Junior Member
**
 		Posts: 6
Joined: Sep 2019
Reputation: 0
RE: [CA11] AIS on an Element 7
I can verify that the AIS transceiver is only connected via its TX (out) wire to the Quark A032 NMEA-2000k bridge. There is no other AIS equipment on the boat. Just for reference this is the old original system with the Raymarine A50 plotter which just received AIS via NMEA and sent Waypoint data to the ST4000+ via NMEA. The SeaTalkng interface wasn't in use.

I've attached system schematics of current and previous system,

Thanks

Chris
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] AIS on an Element 7 - atkinson.cj@btinternet.com - 11-04-19 04:22 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication