Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] AIS on an Element 7
11-07-19, 11:31 AM
Post: #6
RE: [CA11] AIS on an Element 7
Chris,

Solving / correcting this issue will require a NMEA 2000 log from the system. Unfortunately, the diagnostic features of LightHouse Sport v3.9.98 do not support logging of NMEA 2000 data as do MFDs running the latest LightHouse 3 software. It would accordingly be recommended that a Raymarine installer be contacted to visit the vessel (and bring an Axiom MFD running LH3 v3.10.71 or later software along) to log the NMEA 2000 output of the Quark A032 NMEA-2000k bridge. During the visit, it would also be a useful data point to determine whether the MFD responds similarly to ownship data as the Element display appears to be doing.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] AIS on an Element 7 - Chuck - Raymarine - Moderator - 11-07-19 11:31 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)