Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[LW] [LW11] AIS700 do not send position data to DSC VHF
01-30-20, 09:02 AM
Post: #3
RE: [LW11] AIS700 do not send position data to DSC VHF
Dear capmax1,

Thank you for your post.

Have you set the the baud rate to 4800 for the NMEA out for GPS position in ProAIS2? This is in the configuration tab.

The GPS fix for the radio can come from either the C80 or the AIS700, this is end user choice. If you wish to use the data from the AIS700, the information will be coming from the AIS700 NMEA out port on a lo baud rate.

Can you confirm the first 2 images are for AIS700 in and out at 38400?

Can you confirm the 3rd image is for the for the AIS7000 NMEA out at 4800?

Can you also send a wiring diagram of your network?

Many Thanks
Louise
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [LW11] AIS700 do not send position data to DSC VHF - Louise - Raymarine - Moderator - 01-30-20 09:02 AM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)