Thread Closed 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[LW] [LW11] ST70 + Yacht Devices Tank Sensor
11-18-19, 05:40 AM (This post was last modified: 11-18-19 09:32 AM by Chuck - Raymarine - Moderator.)
Post: #3
RE: [LW11] ST70 + Yacht Devices Tank Sensor
Thank you for you reply dear Louise,
on the ST70 I have modified a page selecting (under fuel data group) both "Remaining" and "Liters" (forgive me if the wording is not 100% exact but I am not in close reach of the instruments).
The first one displays the remaining percentage, but the liters is dashed.
I made, more or less the same on the E80 and it shows both.

I have checked on-board and I have used the following data fields:

- ST70 : into the Fuel Group, I picked-up "Fuel Level" and "Fuel Remaining"
- E80: into the Engine Group, I picked up "Fuel 1" and "Total Fuel"

as said previously, I get:

- ST70: Fuel Level shows the remaining fuel percentage
Fuel Remaining shows two dashes
- E80: Fuel 1 shows the remaining fuel percentage
Total Fuel Shows the remaining liters of fuel

Actually, also the ST70 has the fuel manager data fields available, so I guess it should correctly display them. In fact, the Fuel Level percentage is correctly showed, not the same for the Fuel Remaining.

Looking forward for your kind reply
Regards
Find all posts by this user
Thread Closed 


Messages In This Thread
RE: [LW11] ST70 + Yacht Devices Tank Sensor - pacman - 11-18-19 05:40 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)