Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] best AIS for E120 Classic
11-17-19, 10:12 AM (This post was last modified: 11-18-19 01:17 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] best AIS for E120 Classic
I have a 2006 E120 Classic and I would like to fit AIS

I have been told that this old MFD can't support so much information.

Ideally I would like to send and receive information but if it won't be able to cope then receive only would be fine.

It has radar and fishfinder plugged in but no other inputs are used as its a small rib without autohelm or instruments
Find all posts by this user
Quote this message in a reply
11-18-19, 01:31 PM
Post: #2
RE: [CA11] best AIS for E120 Classic
Welcome to the Raymarine Forum Craig,

When operating with the final E-Series Classic MFD software update (v5.69), the MFD may be interfaced to an AIS receiver or AIS transceiver supporting 38400 BAUD NMEA 0183 communications. If seeking a Raymarine AIS receiver, then the AIS350 would be recommended. If seeking a Raymarine AIS transceiver, then the AIS700 would be recommended. The MFD will process and display data for the closest 100 AIS targets.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)