Raymarine forum

I have a M92652 scanner, SN 0780104 connected to a E-80, E02011 0950925, ver 5.69. Scanner software .03.00.
The e-80 does not see the scanner. The scanner worked fine with my RL70C Plus which I replaced with the E-80.
Any help would be appreciated, Thanks, David Gillette

Welcome to the Raymarine Forum David,

Please click here to view a FAQ addressing this subject. Per the referenced FAQ, should your radome not feature the "-S" suffix in its product ID as indicated within the FAQ, then the analog 4D radome may not be used with a C/E-Series Classic MFD.