I have a ST 69 speed and Temp that I would like to integrate into my new setup that I am working on. I have a ES127 installed and will be adding a HS5 network switch, CP470 and a M265 transducer which will replace the existing M260. How do I do this?
Welcome to the Raymarine Forum RKW68,
Was the ST69 previously connected to a Y-Cable which had been interfaced to the M260 transducer and to the DSM300? If so, then this Y-Cable would need to be replaced with the A80345 Y-Cable which would be connected to the ST69, the M265, and the CP470.
I recently removed the RL80C and the DSM250, I don't remember a Y cable being attached. How is the A80345-Y cable connected between the various pieces ?
The A80345 Y-Cable features a plug which is designed to be mated to the CP470's socket, a socket which is designed to be mated to 1kW CHIRP transducers, and a socket which is designed to be plugged into speed/temp transducers which had been designed for use with a DSM250, DSM30, DSM300, CP300, or CP370.