Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] ST 69
06-07-19, 06:38 AM (This post was last modified: 06-07-19 08:42 AM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] ST 69
I have a ST 69 speed and Temp that I would like to integrate into my new setup that I am working on. I have a ES127 installed and will be adding a HS5 network switch, CP470 and a M265 transducer which will replace the existing M260. How do I do this?
Find all posts by this user
Quote this message in a reply
06-07-19, 08:51 AM
Post: #2
RE: [CA11] ST 69
Welcome to the Raymarine Forum RKW68,

Was the ST69 previously connected to a Y-Cable which had been interfaced to the M260 transducer and to the DSM300? If so, then this Y-Cable would need to be replaced with the A80345 Y-Cable which would be connected to the ST69, the M265, and the CP470.
Visit this user's website Find all posts by this user
Quote this message in a reply
06-07-19, 12:36 PM (This post was last modified: 06-07-19 01:04 PM by Chuck - Raymarine - Moderator.)
Post: #3
RE: [CA11] ST 69
I recently removed the RL80C and the DSM250, I don't remember a Y cable being attached. How is the A80345-Y cable connected between the various pieces ?
Find all posts by this user
Quote this message in a reply
06-07-19, 01:07 PM
Post: #4
RE: [CA11] ST 69
The A80345 Y-Cable features a plug which is designed to be mated to the CP470's socket, a socket which is designed to be mated to 1kW CHIRP transducers, and a socket which is designed to be plugged into speed/temp transducers which had been designed for use with a DSM250, DSM30, DSM300, CP300, or CP370.
Visit this user's website Find all posts by this user
Quote this message in a reply
06-07-19, 01:22 PM (This post was last modified: 06-07-19 01:38 PM by Chuck - Raymarine - Moderator.)
Post: #5
RE: [CA11] ST 69
Thank you...
Find all posts by this user
Quote this message in a reply
06-07-19, 01:38 PM
Post: #6
RE: [CA11] ST 69
You're welcome.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us