06-11-19, 06:54 AM
Hi,
I’ve got an S3 Pilotcomputer that was connected to a ST6002 Pilot Controller. Unfortunately the ST6002 took water over Winter (it’s 14 years old) and dosen’t work anymore. I had a contact to Raymarine afterssales that a ST70 pilot control could also be connected. I found a new device on eBay and tried to connect it. I have an IC5 because I had I70 displays mounted an R52131 converter. I tried first to connect th ST70 on the IC5. It started up and then said it couldn’t,find the auto pilot. I then tried to connect it to the seatalk on a E25049 connector. Since then when I connect it it show’s the ST70 logo and then the display goes blank. What I’m trying find out, is if the ST70 controller has a problem or if my wiring is wrong. How can the ST70 be tested?
Hand drawn shema attached
I’ve got an S3 Pilotcomputer that was connected to a ST6002 Pilot Controller. Unfortunately the ST6002 took water over Winter (it’s 14 years old) and dosen’t work anymore. I had a contact to Raymarine afterssales that a ST70 pilot control could also be connected. I found a new device on eBay and tried to connect it. I have an IC5 because I had I70 displays mounted an R52131 converter. I tried first to connect th ST70 on the IC5. It started up and then said it couldn’t,find the auto pilot. I then tried to connect it to the seatalk on a E25049 connector. Since then when I connect it it show’s the ST70 logo and then the display goes blank. What I’m trying find out, is if the ST70 controller has a problem or if my wiring is wrong. How can the ST70 be tested?
Hand drawn shema attached