+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: General Discussions (/forumdisplay.php?fid=2)
+--- Thread: [CA] [CA11] Raymarine Cartography Adaptor (/showthread.php?tid=10423)
[CA11] Raymarine Cartography Adaptor - lawlerl - 01-31-20 10:41 AM
We purchased a Sealine which has a Raymarine C80, as we could not get charts for it and were advised to purchase Navionics charts and a Raymarine Chartography Adaptor - which we did - a note with the adaptor says a software upgrade may be required - you will need to upgrade your product to the latest software before use - can you confirm if it is the software on the C80 or the software on the adaptor that needs to be upgraded?
RE: [CA11] Raymarine Cartography Adaptor - Chuck - Raymarine - Moderator - 02-03-20 11:20 AM
Welcome to the Raymarine Forum lawlerl,
As indicated within the Software History table of the C-Series Classic MFD software update web page, support for the Raymarine Cartography Adapter (uSD / CF adaptor) was introduced with the v5.04 software update. Accordingly, should the MFD currently be operating with earlier software, then it would be necessary to update the MFD's software with C-Series Classic MFD v5.16 software (the final software update).
RE: [CA11] Raymarine Cartography Adaptor - lawlerl - 02-04-20 07:27 AM
Many thanks Chuck,
We'll check the software and update if needed.
RE: [CA11] Raymarine Cartography Adaptor - Chuck - Raymarine - Moderator - 02-04-20 08:26 AM
You're welcome.