+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Radar (/forumdisplay.php?fid=125)
+--- Thread: [CA] M92652 to E-80 (/showthread.php?tid=5003)
[CA] M92652 to E-80 - draudio - 03-17-18 07:44 AM
I have a M92652 scanner, SN 0780104 connected to a E-80, E02011 0950925, ver 5.69. Scanner software .03.00.
The e-80 does not see the scanner. The scanner worked fine with my RL70C Plus which I replaced with the E-80.
Any help would be appreciated, Thanks, David Gillette
RE: [CA] M92652 to E-80 - Chuck - Raymarine - Moderator - 03-19-18 08:39 AM
Welcome to the Raymarine Forum David,
Please click here to view a FAQ addressing this subject. Per the referenced FAQ, should your radome not feature the "-S" suffix in its product ID as indicated within the FAQ, then the analog 4D radome may not be used with a C/E-Series Classic MFD.