+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Networking / System Integration (/forumdisplay.php?fid=21)
+--- Thread: [LW] [LW11] SeaTalk Converter vs Connector (/showthread.php?tid=7615)
Pages: 1 2
RE: [LW11] SeaTalk Converter vs Connector - Tizor - 08-01-19 10:20 AM
Thank you for your response. One additional question on this. As noted above, my Raystar 125 is interfaced with the E 120 Classic Data Master via its' nmea 0183 port. Is it also necessary to feed the Raystar 125 output to the nmea input on the ST5000+? I'm guessing not.
RE: [LW11] SeaTalk Converter vs Connector - Louise - Raymarine - Moderator - 08-12-19 02:41 AM
Dear Tizor,
Many thanks for your post.
Is the ST5000 networked to your E-classic over seatalk 1? The GPS only requires connecting to the E-classic, not to both the E-classic and the ST5000. As long as the ST5000 is networked to the E-classic, the E-classic will send the GPS data out over the network.
Many Thanks
Louise