Raymarine forum / Raymarine Forums / Networking / System Integration v / [CA] [CA11] Networking Axiom Pro RVX and C90W

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Networking Axiom Pro RVX and C90W
08-01-19, 07:14 PM (This post was last modified: 08-05-19 01:23 PM by Chuck - Raymarine - Moderator.)
Post: #1
Pawseidon Offline
Junior Member
**
 		Posts: 10
Joined: Jul 2019
Reputation: 0
[CA11] Networking Axiom Pro RVX and C90W
New to Raymarine. I have a "new to me" 2008 46' cruising boat with pilot house and flybridge helm stations that both have C90W MFD's with a single 600W transducer via DSM30 sounder (no radar, AP). I want to add an Axiom Pro 12 RVX to both helm stations and add Radar, AP, and AIS while keeping the C90W's as secondary displays. Can these be networked to share information? Thanks.
Find all posts by this user
Quote this message in a reply
08-05-19, 01:31 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Networking Axiom Pro RVX and C90W
Welcome to the Raymarine Forum Pawseidon,

Please click here to view a FAQ addressing this subject. If seeking to replace both MFDs with Axiom Pro MFDs (an Axiom Pro S MFD would be recommended for the second MFD), then the FAQ found here would apply. Should you need assistance in selecting a RV transducer, an autopilot, or radar transducer for the Axiom Pro MFD(s), then please respond accordingly.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication