Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG] what is the power (watts) for Axiom 9" with DV (CPT100)?
04-28-20, 06:34 PM (This post was last modified: 04-28-20 08:13 PM by Tom - Raymarine - Moderator.)
Post: #1
what is the power (watts) for Axiom 9" with DV (CPT100)?
what is the power (watts) for Axiom 9" with DV (CPT100)?

https://www.raymarine.com/multifunction-...xiom9.html

I am using Google chrome as my browser.

see attached for screenshots


Attached File(s) Thumbnail(s)
   

http://www.youtube.com/njfishing1 - from Captain Steve
Find all posts by this user
Quote this message in a reply
04-28-20, 08:24 PM
Post: #2
RE: what is the power (watts) for Axiom 9" with DV (CPT100)?
Hello ray18,

We don't have a power consumption specification for an Axiom 9 DV display because that's not a product model we make, only Axiom 9 or Axiom 9 RV, and most RV systems use the RV100 transducer.
The average power consumption difference however, between using an RV and CPT100 transducer will be minimal: the Axiom 7's page lists the power consumption difference between 7DV with CPT100 and 7RV with RV100 as being <0.2W, which I'm guessing is going to be smaller than the small natural variations in power consumption between any two similar test systems.
These are also theoretical maximum consumptions, the actual value will depend on things like water depth and the display backlight brightness.

Regards,
Tom

Raymarine since 1999.
Interests: Diagnosis of problems in sonar/fishfinders, NMEA2000, ethernet comms, autopilots, thermal cameras
Location: Sydney, Australia.

Please don't PM me asking for direct support, please ask a public question instead so that others can see the question and answer. Forum posts will always be answered before PM requests.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)