Raymarine forum / Raymarine Forums / Networking / System Integration v / [CA] [CA11] st2 / stng integration compatibility

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] st2 / stng integration compatibility
04-29-20, 09:47 AM (This post was last modified: 04-29-20 02:57 PM by Chuck - Raymarine - Moderator.)
Post: #1
bucky Offline
Junior Member
**
 		Posts: 23
Joined: Mar 2018
Reputation: 0
[CA11] st2 / stng integration compatibility
i would like to use a RAYMARINE E22067 ST290 ACTIVE DEPTH POD in my stng network. any chance this might work. existing network includes a st70 mfid
bucky
Find all posts by this user
Quote this message in a reply
04-29-20, 03:20 PM (This post was last modified: 04-29-20 03:22 PM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] st2 / stng integration compatibility
Welcome to the Raymarine Forum Bucky,

It is indeed possible to use a ST290 Pod with any of the following products:
- i70/i70S MFID
- ST70/ST70+ MFID
- ST290 DPU

Failed ST290 pods may be replace with an iTC-5 Analog Instrument Converter.
Find all posts by this user
Quote this message in a reply
04-30-20, 12:32 AM
Post: #3
bucky Offline
Junior Member
**
 		Posts: 23
Joined: Mar 2018
Reputation: 0
RE: [CA11] st2 / stng integration compatibility
thanks again chuck
bucky
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication