ST-STng wiring: power and p70 connections
|
04-29-16, 02:17 PM
Post: #1
|
|||
|
|||
ST-STng wiring: power and p70 connections
I am installing an EV-100 (on the dining room table at the moment, but later in a boat).
1) It would be convenient to wire the red power supply line to the ST-STng converter hub and let it supply power through the bus to the other components. I have a 1m backbone cable between the ST-STng converter hub and STng hub. The rest of the ng network is as supplied with the EV-100. Is this OK? 2) Can I plug the p70 into one one of the white sockets on the ST-STng converter or does it have to be plugged into the STng hub? Again, it simplifies my wiring if I can do this. Thx. Don. |
|||
04-29-16, 02:20 PM
Post: #2
|
|||
|
|||
RE: ST-STng wiring: power and p70 connections
Welcome to the Raymarine Forum Don,
Q1) It would be convenient to wire the red power supply line to the ST-STng converter hub and let it supply power through the bus to the other components. I have a 1m backbone cable between the ST-STng converter hub and STng hub. The rest of the ng network is as supplied with the EV-100. Is this OK? A1. Yes. Q2) Can I plug the p70 into one one of the white sockets on the ST-STng converter or does it have to be plugged into the STng hub? A2. Yes. |
|||
« Next Oldest | Next Newest »
|
User(s) browsing this thread: 1 Guest(s)