[CA] [CA11] Transducer
|
11-22-19, 01:19 PM
(This post was last modified: 11-22-19 03:14 PM by Chuck - Raymarine - Moderator.)
Post: #1
|
|||
|
|||
[CA11] Transducer
There seem to be some confusion on the dead rise specs on the RV-312 transducer ,could you possibly clear this up for me ?
|
|||
11-22-19, 03:33 PM
(This post was last modified: 11-22-19 03:33 PM by Chuck - Raymarine - Moderator.)
Post: #2
|
|||
|
|||
RE: [CA11] Transducer
Welcome to the Raymarine Forum Jarmstrong,
Please accept our apologies for the conflicting specification. The correct specification and as indicated below is that the RV transducers will support +/- 6 degrees of deadrise from their stated degree of offset (ex. 12 degree RV transducers will support hulls having deadrise from 6 to 18 degrees in the installation location) |
|||
11-29-19, 10:24 AM
(This post was last modified: 11-29-19 01:23 PM by Chuck - Raymarine - Moderator.)
Post: #3
|
|||
|
|||
RE: [CA11] Transducer
Thank you Chuck.
|
|||
11-29-19, 01:24 PM
Post: #4
|
|||
|
|||
RE: [CA11] Transducer
You're welcome.
|
|||
« Next Oldest | Next Newest »
|
User(s) browsing this thread: 1 Guest(s)