Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Connecting a SeatalkNG backbone to a NMEA 2000 backbone
03-05-19, 03:56 PM (This post was last modified: 03-06-19 01:54 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] Connecting a SeatalkNG backbone to a NMEA 2000 backbone
I want to double check that my connections are correct. I have a Seatalk 5-way connector and a separate NMEA 200 backbone that I would like to join together. I know that I can connect the two by using each as a spur connection. In order to keep things a little cleaner I would like to do the following. Join the backbones using a Raymarine A06046 adapter by connecting a Seatalk spur connection to a NMEA 2000 termination connection. I have attached a picture and thanks in advance.


Attached File(s) Thumbnail(s)
   
Find all posts by this user
Quote this message in a reply
03-06-19, 01:57 PM (This post was last modified: 03-06-19 01:58 PM by Chuck - Raymarine - Moderator.)
Post: #2
RE: [CA11] Connecting a SeatalkNG backbone to a NMEA 2000 backbone
Welcome to the Raymarine Forum JeepSWAG,

A SeaTalkng to DeviceNet Spur adapter shown within your photo should not be used to join these two backbones to one another. Please click here to view a FAQ addressing how to properly join these two backbones to one another.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)