Raymarine forum / Raymarine Forums / Multifunction Displays v / C120 - Fishfinder Setup missing from menu

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
C120 - Fishfinder Setup missing from menu
06-08-16, 07:41 PM
Post: #1
edhebert Offline
Junior Member
**
 		Posts: 1
Joined: Jun 2016
Reputation: 0
C120 - Fishfinder Setup missing from menu
I have a C120 and my fishfinder's temperature is reading a few degrees high. After consulting the manual, I see that can be adjusted via Menu -> Fishfinder Setup. However, when I select my Menu, there is no option for Fishfinder Setup. Am I missing something? I have a Fishfinder sensor installed, and it's passing depth and temperature to my C120. However, I see no option to adjust or calibrate it.

Thanks in advance for your help
Find all posts by this user
Quote this message in a reply
06-09-16, 08:47 AM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: C120 - Fishfinder Setup missing from menu
Welcome to the Raymarine Forum edhebert,

Please respond with the model of fishfinder which has been interfaced to your MFD.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication