[TG] [TG11] A57D - shows "no pilot"
|
05-27-20, 06:35 AM
(This post was last modified: 06-01-20 11:13 PM by Tom - Raymarine - Moderator.)
Post: #1
|
|||
|
|||
[TG11] A57D - shows "no pilot"
Hi,
I wired the network this way and A57D do not see my autopilot. What is incorrect and is there anything to check on settings maybe? |
|||
06-01-20, 11:20 PM
Post: #2
|
|||
|
|||
RE: [TG11] A57D - shows "no pilot"
Hello Dmitry,
The A50/57/70 didn't have as complete autopilot integration (control) of some of the larger or newer displays, but you should still be able to send navigation data to the pilot. Your connection diagram is fine, it's very good. To check whether the A57 really is able to communicate with the autopilot, you can do one of two things:
If either of these work then your connection is good. Regards, Tom Raymarine since 1999. Interests: Diagnosis of problems in sonar/fishfinders, NMEA2000, ethernet comms, autopilots, thermal cameras Location: Sydney, Australia. Please don't PM me asking for direct support, please ask a public question instead so that others can see the question and answer. Forum posts will always be answered before PM requests. |
|||
« Next Oldest | Next Newest »
|
User(s) browsing this thread: 1 Guest(s)