Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] e120 mfd repeater problem

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] e120 mfd repeater problem
08-10-18, 10:29 AM (This post was last modified: 08-16-18 10:13 AM by Chuck - Raymarine - Moderator.)
Post: #1
chriscd Offline
Junior Member
**
 		Posts: 5
Joined: Aug 2018
Reputation: 0
[CA11] e120 mfd repeater problem
i have searched the faqs but do not see any solution to my problem.
i have an e120 mfd master and repeater that were installed on my jeanneau when it was new in 2006. the master is working fine but the repeater is stuck in a loop in which it wants me to designate it as the master and wont allow me to
do anything else. how can i fix this?
chris chase-dunn
dreamcatcher, san pedro california
Find all posts by this user
Quote this message in a reply
08-16-18, 10:26 AM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] e120 mfd repeater problem
Welcome to the Raymarine Forum Chris,

Please click here to view a FAQ addressing this subject.
Find all posts by this user
Quote this message in a reply
08-18-19, 09:26 AM
Post: #3
chriscd Offline
Junior Member
**
 		Posts: 5
Joined: Aug 2018
Reputation: 0
RE: [CA11] e120 mfd repeater problem
thanks chuck
Find all posts by this user
Quote this message in a reply
08-19-19, 12:43 PM
Post: #4
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] e120 mfd repeater problem
You're welcome.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication