ST-STng wiring: power and p70 connections

[bufflehead]

I am installing an EV-100 (on the dining room table at the moment, but later in a boat).

1) It would be convenient to wire the red power supply line to the ST-STng converter hub and let it supply power through the bus to the other components. I have a 1m backbone cable between the ST-STng converter hub and STng hub. The rest of the ng network is as supplied with the EV-100.

Is this OK?

2) Can I plug the p70 into one one of the white sockets on the ST-STng converter or does it have to be plugged into the STng hub?

Again, it simplifies my wiring if I can do this.

Thx. Don.

[Chuck - Raymarine - Moderator]

Welcome to the Raymarine Forum Don,

Q1) It would be convenient to wire the red power supply line to the ST-STng converter hub and let it supply power through the bus to the other components. I have a 1m backbone cable between the ST-STng converter hub and STng hub. The rest of the ng network is as supplied with the EV-100.

Is this OK?

A1. Yes.

Q2) Can I plug the p70 into one one of the white sockets on the ST-STng converter or does it have to be plugged into the STng hub?

A2. Yes.