[CA] [CA11] LH3.9 upgrade no sailing settings
|
05-04-19, 12:17 PM
(This post was last modified: 05-10-19 12:21 PM by Chuck - Raymarine - Moderator.)
Post: #1
|
|||
|
|||
[CA11] LH3.9 upgrade no sailing settings
I just updated my Axiom Pro to LH3.9 (from 3.8) and do not see the new sailing settings under Settings->Boat Details. My boat type is Sail Cruiser. I tried setting to Powerboat then back to Sail Cruiser but no change.
Any suggestions? |
|||
05-10-19, 12:25 PM
Post: #2
|
|||
|
|||
RE: [CA11] LH3.9 upgrade no sailing settings
Welcome to the Raymarine Forum Steve,
It is recommended that your system's waypoints, routes, and tracks be exported to a microSD memory card, that Factory Reset (HOME->SETTINGS->THIS DISPLAY->FACTORY RESET) be commanded to address this issue. Setting the boat type to one of the sailing boat types listed should then permit a Laylines tab to be displayed within the Chart application's settings (MENU->SETTINGS). |
|||
05-15-19, 07:55 AM
Post: #3
|
|||
|
|||
RE: [CA11] LH3.9 upgrade no sailing settings
This worked, thanks.
|
|||
05-15-19, 07:57 AM
Post: #4
|
|||
|
|||
RE: [CA11] LH3.9 upgrade no sailing settings
You're welcome.
|
|||
« Next Oldest | Next Newest »
|
User(s) browsing this thread: 1 Guest(s)