Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
DownVision Depth
02-28-16, 02:26 PM (This post was last modified: 02-29-16 10:06 AM by Chuck - Raymarine - Moderator.)
Post: #1
DownVision Depth
How deep will the DownVision work? I fish in 80 to 140 feet of water. Will DownVision work for these depths?
Find all posts by this user
Quote this message in a reply
02-29-16, 10:09 AM
Post: #2
RE: DownVision Depth
Welcome to the Raymarine Forum Dratchonline,

Raymarine products supporting DownVision features (ex. Dragonfly, ax8 MFDs, eSx8 MFDs, and CP100) are designed to support operation in depths up to 600'.
Find all posts by this user
Quote this message in a reply
08-03-16, 08:02 PM (This post was last modified: 08-08-16 01:15 PM by Chuck - Raymarine - Moderator.)
Post: #3
RE: DownVision Depth
Is Downvision the same as side imaging?
Find all posts by this user
Quote this message in a reply
08-08-16, 01:35 PM
Post: #4
RE: DownVision Depth
Dratchonline,

Q1. Is Downvision the same as side imaging?
A1. No. As the name suggests, DownVision shows what is under the transducer (60 degree cone), while SideVision is designed to provide imaging of structure and fish well out to the sides of the vessel. SideVision is supported by adding a CP200 Sounder Module with CPT-200 Transducer to an a/c/e/eS/gS-Series MFD. See screen snapshot below showing DownVision and SideVision sonar imaging:

[Image: attachment.php?aid=440]
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)