Fusion interface to ES78
|
07-11-17, 11:32 AM
(This post was last modified: 07-17-17 10:26 AM by Chuck - Raymarine - Moderator.)
Post: #3
|
|||
|
|||
RE: Fusion interface to ES78
Hi just to be sure what I plan to do would work please note. There is presently no Seatalk NG cable connecting my upper helm to the lower helm where the Fusion radio is along with MFD classic C120 vintage 2004. In the upper helm there is another MFD C120 classic vintage 2004 along with the ES7 MFD. The ES7 MFD is interfaced to the C 120 using the Seatalk to Seatalk NG converter . So I was thinking of installing another Seatalk to Seatalk NG converter in the lower helm and connect the Fusion radio to it using devicenet to Seatalk NG part # A06045 you mentioned. There would be no Seatalk NG or Nema 2000 cable going from the lower helm to the upper helm. The only data cable going from the lower to upper helm. There would be the existing Seatalk cable which connects the two C 120 Classics MFD. So in my plan the Fusion radio data would be traveling along the Seagate cable then going thru the Seatalk to Seatalk NG converter at the upper helm and to the ES7 MFD.
Is this workable ? PS Raymarine had another Forum back in 2015 it does not seem that information was migrated to the present forum is there a way to view it? |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
Fusion interface to ES78 - [email protected] - 07-07-17, 06:32 PM
RE: Fusion interface to ES78 - Ron - Raymarine - Moderator - 07-10-17, 02:13 PM
RE: Fusion interface to ES78 - [email protected] - 07-11-17 11:32 AM
RE: Fusion interface to ES78 - Chuck - Raymarine - Moderator - 07-17-17, 10:39 AM
RE: Fusion interface to ES78 - [email protected] - 07-17-17, 01:38 PM
RE: Fusion interface to ES78 - Chuck - Raymarine - Moderator - 07-17-17, 01:53 PM
|
User(s) browsing this thread: 1 Guest(s)