Lighthouse III Oil Pressure Data
|
09-08-17, 10:18 AM
Post: #1
|
|||
|
|||
Lighthouse III Oil Pressure Data
Hi guys... I have an e127 and Axiom 12 RV installed on my helm. Both units are running the latest software available. I'm using a Mercury NMEA 2000 gateway to provide engine data to both MFDs.
On the e127, all engine data is present, including oil pressure. However, the Axiom is not showing oil pressure (see attached pics). I've tried to edit the page to see if there are other oil pressure options available, however, the circular engine data graphic that contains the gears, oil, water, RPM info, does not appear to be editable. Any thoughts or suggestions on how to get the Axiom to display oil pressure? Thanks in advance. |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
Lighthouse III Oil Pressure Data - trush640 - 09-08-17 10:18 AM
RE: Lighthouse III Oil Pressure Data - Chuck - Raymarine - Moderator - 09-12-17, 03:25 PM
RE: Lighthouse III Engine Temp Data - trush640 - 09-13-17, 09:32 AM
RE: Lighthouse III Oil Pressure Data - Chuck - Raymarine - Moderator - 09-13-17, 09:48 AM
|
User(s) browsing this thread: 1 Guest(s)