Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] Trouble finding replacement for C80 MFD

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] Trouble finding replacement for C80 MFD
12-13-17, 11:21 AM (This post was last modified: 12-13-17 11:32 AM by Chuck - Raymarine - Moderator.)
Post: #5
ddfour1 Offline
Zamboati
***
 		Posts: 66
Joined: Feb 2016
Reputation: 0
RE: [CA] Trouble finding replacement for C80 MFD
Thanks.

1. Is the E66066 adapter the correct adapter to use to get fishfinder data into the Axiom9 as it was with the eS97, or is there a different adapter for Axiom9?

2. Surprised to see that the Axiom9 does not have a STng port. What is the adapter cable required to connect the Axiom as a spur on a STng backbone?

3. Can the Axiom be powered by STng or does it need a separate dedicated power source?

4. Are STng backbones on their way out as a networking system? Should I be building some other networking platform as I go about upgrading my 2003 vintage electronics?

Thanks

Dave
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA] Trouble finding replacement for C80 MFD - ddfour1 - 12-13-17 11:21 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication